Phoenix, Arizona · Equipment · Blades & Tooling · Rentals · Service & Repair

Superabrasive

SP4S Walk-Behind Trowel, 46″

US MSRP $5,490

SP4S features a Honda GX390 one-cylinder gasoline industrial engine with an electric starter, delivering 11.7 HP and 26.5 Nm of torque at 2,500 RPM. Also offered as SP4 with Honda GX270, one-cylinder gasoline engine (no electric starter).

Engine Honda GX390
Engine Power 11.7 hp / 8.7 kW
Engine Capacity 389 cc / 23.74 cu.in
Engine RPM 3600 rpm
Rotor RPM 50–200 rpm
Diameter 46 in / 116 cm
Blades 4

Key specifications

Manufacturer Superabrasive
Series SP
Model SP4S
Power Gasoline
Working Width 46 in / 116 cm
Engine Honda GX390, 389 cc, 11.7 hp / 8.7 kW
Engine RPM 3600 rpm
Rotor RPM 50–200 rpm
Rotor System Single rotor
Blades per Rotor 4
Fuel Type Gasoline
Fuel Tank Capacity 1.6 gal / 6.1 L
Starting System Electric start with ignition key
Machine Weight 306.4 lbs / 139 kg
Machine Dims (Work Mode) 84 x 29.5–45.3 x 48 in
Machine Dims (Transport Mode) 49 x 38 x 48 in
Optional Accessory Transport dolly jack (A151)
Application Concrete finishing

What this machine is for

  • Concrete finishing

Features

  • Rubber stop holds the machine securely in the service position, improving safety and stability during maintenance.
  • Handle design folds forward, allowing the machine to be safely laid on its side for blade, spider, and bottom-end service without lifting the unit. Compact folding handle has a convenient lifting point for forklift or crane handling.
  • Upgraded hardened steel thrust collar with rifled grease distribution improves lubrication efficiency and extends service life compared to bronze bushings.
  • Oversized main shaft with larger diameter reduces bending caused by transport, strapping, and vibration, helping maintain balance and extend service life.
  • Sealed main shaft assembly with O-ring seals to prevent moisture intrusion, reduce corrosion and shaft-to-spider seizure.
  • Built-in hour meter and tachometer allows accurate tracking of run time and engine speed, improving service interval management.
  • Reinforced gearbox and spider assembly designed for reduced maintenance and extended service life.
  • Improved grease fitting placement positioned farther out for easier access and more consistent lubrication.
  • Rotated engine orientation (180°) prevents oil migration and hydrolock when placed in service mode, while also improving balance.
  • Durable cam-based adjustment system resists wear compared to knurled or squeeze-style designs.
  • Improved machine balance –Engine offset slightly forward to better counter centrifugal and gyroscopic forces during operation.
  • Optional dolly jack for easy transportation (A151) – Front-mounted wheel kit slides beneath the machine, offering improved maneuverability.

The Bladz Guy

Bladz Guy explains

Not sure this blade fits your job?

Know the material. Match the blade. Run it right.

Tell us the material, your machine and the blade size. We’ll recommend the right blade

Need help choosing equipment?

Ask about pricing, a demonstration, or hands-on training on this machine.