What should I check before rental pickup?

A rental goes smoother when the setup is planned before pickup. Checklist Square footage and surface condition, so tooling can be matched. Propane: which tank the machine uses and whether you need one. Dust collection to pair with the grinder. Power available on site for electric machines. Trailer or truck to transport the machine safely.
What information should I gather before calling for repair?

We can’t diagnose before inspection, but good information up front helps us plan parts and the next step. Have this ready Manufacturer and model. Serial number (photo of the plate is ideal). What happened and when it started. Any noises, smells, error codes or leaks. Photos or a short video. Purchase details if you think […]
How do I match grinder tooling to surface condition?

Tooling choice depends on what’s on the surface and where you want to end up. Removing epoxy calls for aggressive segments; fine grinding before polish calls for a continuous rim or finer tooling. Tell us Surface condition — coatings, glue, paint, laitance, bare slab. Concrete hardness if known. Machine — hand grinder or floor grinder, […]
What changes when cutting wet vs dry?

Water cools the segments, flushes slurry and suppresses dust. Some blades — like many pro walk-behind and wall saw blades — are rated wet only. Running them dry can overheat the segment and damage the blade. Before a dry cut Confirm the blade is rated for dry cutting. Plan dust control — a HEPA dust […]
What blade cuts this material?

A blade that cuts well in one material can glaze, wear fast, or chip the edge in another. Before we recommend a blade, we ask about four things. What we ask Material — cured concrete, green concrete, asphalt, masonry, stone, ductile iron or mixed. Machine — hand-held saw, walk-behind (and horsepower), table saw, wall saw […]